Best part tolerances
The patented Adaptive Heating System analyses the printing geometry and adjusts the heating power to achieve always an optimum energy input. Without thermal post-treatment, you get even finer details and compliance with narrow tolerances. Due to the high stiffness and strength, even embossing dies for aluminium and stainless steel sheets can be printed.
New extrusion technology
Our extruder was developed with flexibility and robustness in mind. The feed force, which is four times higher than that of its previous models, makes it possible to process fibre-reinforced high-performance polymers with a high percentage of filling. The specially designed filament guide automates the loading process.
Monitored printing process
By integrating a camera system, temperature recording and the use of servo motors, the printing process is continuously monitored. This allows the printer to intervene independently when deviations occur.
Integrated calibration routines guarantee consistent part quality. The Apium print control software automatically notifies you about maintenance operations and guides you through the procedures step-by-step.
Documentation & Safety
All the important parameters of a printing process are automatically made available in a PDF protocol. The integrated user manage- ment prevents any unauthorized access. For your data security, we have decided against cloud based solutions.
The control software is specially adapted to our printer hardware and optimized for processing high-performance polymers. An intuitive user interface allows easy operation of the printer. You can manage print jobs and check the status of the printer at any time.
The open system allows the use of other materials that are not available in our product portfolio. The P220 also allows the processing of metal filled filaments which can be sintered.
Our service department will train you in the
handling of your printer. We will be happy to answer any questions you may have about the printer and other challenges of 3D printing of high performance polymers.
205 x 155 x 150 mm
850 x 685 x 675 mm
10 μm horizontally 3 μm vertically
0,2 – 0,8 mm
0,05 – 0,6 mm
> 250 μm
Up to 540°C
Up to 180°C
Up to 160°C
700 W max.
< 55 dB(A)
STL, OBJ, G-Code
WLAN*, Ethernet *can be disabled
PEEK, PEEK-CFR, PP, PEI ULTEM, Smart ABS, 17-4PH, 316L