Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.
The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.
The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.
Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.
The LPD Plus technology works with two nozzles and a double hot-end.
The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.
The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.
The M300 Dual automatically pauses the print when the filament's jammed, run out, or when the nozzle got clogged.
Third-party filaments available on spools are fully supported in both single and dual extrusion modes.
Z-SUITE 2 supports raft-free 3D printing. A glass build platform is recommended for this option.
The model's position on the build-platform can be optimized to reduce support or printing time.
Models can be a easily replicated to fit multiple parts of the same design on the build platform.
Z-SUITE 2 highlights the walls too thin to be printed properly to prevent failed prints.
*** Hepa Cover sold separately ***